|
Corvette Control Arm Bushings |
|
The factory rubber bushings in your control arms will flex excessively under load, effectively altering your alignment specs. Urethane bushings are significantly stiffer than the factory rubber, and will significantly reduce this deflection. A full set for C5 or C6 is $300, and includes a special Blackdog sleeve and shaft kit. 
For even better control, Blackdog offers a monoball conversion kit, for the lower control arms. This replaces the factory rubber bushings, with precision machined anodized aluminum bushings and monoball spherical bearings. This is the ultimate street / race setup, and is what we use on the race car.
$675 a set (two control arms), front or rear. $1300 for both. Includes urethane bushings for the upper arms. Installation is available. |
|
 Upgrading factory sway bars, or adding bars where not included from the factory, will improve the handling of your car on the street or the track. Sway bars work by reducing body roll during cornering.
Our C5 package feature front bars that are 115% stiffer than stock Z51 bars, and adjustable rear bars that offer stiffness increases of 60-150%. Kit comes complete with oil impregnated bushings, and performance end links. $725
Our C6 package features a 30% increase in stiffness up front, and an adjustable rear which is 15-80% stiffer vs. the stock Z51, and -15% to +30% vs. stock Z06. $425
Blackdog also offers sway bar packages for other vehicles, including Camaros, muscle cars, and SUV’s. |
Blackdog Corvette Lowered Uprights |
|
Lowering the ride height of your Corvette lowers the center of gravity, which improves handling. Our upright not only lowers your car, without significant changes to geometry, but is also a strength improvement over the factory part. The upper ball joint has also been replaced with a steel monoball bearing and stud, further increasing strength and improving performance. Uses stock hubs, bearings, and studs, which can be transferred from stock uprights, or, we can provide new GM pieces, at an additional cost. $6200 set of 4 (bare spindles) |
 The Blackdog Speed Shop is an authorized dealer / installer of the finest air ride systems on the market…Air Ride Technologies. So, whether you want to cruise low and slow down the boulevard, or tight and fast around the track, Black Dog can design and install the perfect system for you.
|
 Blackdog is pleased to offer custom coil over suspension packages. Fixed or adjustable shocks and custom spring packages, chosen based on vehicle weight, ride height, intended use, and budget. Installation and setup are also available, and recommended for optimum performance. Prices and specifications vary by appliation. Call for details. |
|
|
|
|
|
